Sorry! nothing found for
Modified on Mon, 13 Feb 2023 at 10:57 AM
The Parkonect software tracks parkers as they come and go from the garage. At times the system may not recognize that the parker has left or entered the garage due to several reasons (internet loss, construction, etc...) that will result in needing to set the parker to neutral. In essence, you're re-setting their status within the system so that they can either enter or leave the garage.
Monthly parkers can be set to neutral in three ways, read on to learn about these options.
This function should be used if you want to set every parker in the garage to neutral.
Using Quick Links > Garage Settings > Accounts, use the button “Set All Accounts to a Neutral State.”
You will be prompted to log out all open monthly parkers at the same time as setting them to neutral. This is generally recommended if you have put the gate in the upright position or if you have turned passback off.
This function should be used to set all parkers within a specific account to neutral, not all parkers for the garage.
Using Quick Links > Garage Settings > Accounts, select the account you want to set to neutral.
Once in the account, use the button “Set All Cardholders to a Neutral State.”
Please note, unlike the above function, you will not be prompted to log the parkers out. If this is desired, you should use the Enhanced Count tab on the Garage log and log them out individually.
To set a specific cardholder to neutral, perform a search and select the desired cardholder and check the “Neutral State” check box. Be sure to click Update once you have made changes.
Was this article helpful?
Thank you for your feedback
Sorry! We couldn't be helpful
Let us know how can we improve this article! *
We appreciate your effort and will try to fix the article